Problem: When I run the software I see
the video for a few seconds then the image fades to blue.
This is usually caused by activating the input
channels in the software without having a camera connected to the
video input.
You should only activate the input channels if you
actually have a camera connected to the input port that your
activating.
For some reason if you activate channels with no
cameras connected to them you will see the cameras that you do have
connected for a few seconds then all cameras on that card will fade
to blue. It has something to do with the way that the software tries
to balance the color between all of the cameras connected to the
card. If your having this problem deactivate the unused channels.
